Cabinet Swatchbook

Cabinet Visualizer

Use this cabinet visualizer to try a different finish on the doors in your kitchen photo. Outline the faces you want to change, choose a finish and draw the divider across a door to compare it with the original. The countertop stays in view.

Cabinet door preview

Select the cabinet faces

Tap the corners of a door in order. Close the outline before moving on to another face.

Start with the doors you intend to change

A cabinet decision often begins with a part of the room you already like. If the countertop is staying, keep it in the photograph. It gives you something familiar to look at while the door finish changes. Pick a view from which you can see the faces you are considering as well as the edge of the worktop. A photograph looking straight down at a counter leaves very little of the doors visible. A view from across the kitchen usually gives the selection a more useful outline.

Use this page while the question is about the doors themselves. You can leave a tall cabinet in its original finish, change the doors underneath the counter, or focus on an island face. Select just the parts that belong to the decision in front of you. When the conversation moves on to a cabinet and countertop pairing for a client, the main studio brings those material choices together in a proposal. Here the existing worktop provides a reference while you narrow down the cabinetry.

Try a door finish in three steps

01 · Choose the photo

Open your kitchen photograph or start with the example above. Look for a door edge that you can follow all the way around.

02 · Trace the cabinet face

Place points around the visible face and choose Finish outline. Use Mark cabinets again if a separate door belongs in the same comparison.

03 · Review the finish

Choose a cabinet finish and move the divider across the photograph. The original appears on the left and the selected finish on the right.

Compare finishes from the same viewpoint

Start with a door that has a clear boundary. An appliance, an open shelf or a gap between cabinet runs makes a natural place to stop. If a handle or an object hides the corner you are looking for, use the visible shape as your guide. The outline describes the surface in this photograph. A selection that extends across a wall or the edge of a counter brings that surface into the comparison and makes a change of finish harder to judge.

Choose a place to look before switching finishes. It might be the strip of cabinetry below the sink or the face at the end of an island. Look at how clearly that face stands out from the floor or worktop. Switch finishes and return your eye to the same spot. Keeping your attention on one boundary helps you identify what you prefer about a finish instead of responding to a different part of the room each time.

On your own photograph you see one finish option at a time. Your outline carries over when you switch the finish, so the next option covers the same area. The homepage has a side-by-side display of three palettes on its demonstration kitchen. That gallery is useful for getting a sense of the range before working with your own room. The divider here answers a different question: how does the selected area look compared with the cabinet you have today?

Slide all the way back to the original when two choices start to look alike. Notice what draws your attention in the unedited photograph, then move the divider slowly across that area. If you find yourself comparing the wall in one version with the doors in the other, reposition the divider so the comparison passes through a single door. You can leave an adjoining bank of cabinets untouched to see how the proposed change relates to a finish you intend to keep.

Read the door finish against the existing countertop

Look at the narrow line where the cabinet front meets the countertop edge. A warm door beside a cooler worktop can make that coolness more apparent, even with the worktop outside the outline. The reverse can happen when a cooler door sits next to warmer stone. Compare the worktop with the original photograph to check what you are seeing. Its appearance in the room can feel different simply because the color beside it has changed.

Now look away from that edge and consider the whole bank of doors. A pairing that feels quiet in a small corner may read quite differently across the island. Decide whether you want to keep that contrast before changing another material. If it is the worktop itself that you want to try in a different finish, use the countertop visualizer. Keeping the decisions separate at this stage makes it easier to explain which material you would revisit.

Carry a door selection into a client proposal

Once a client has a preferred door finish, take the same original photograph into the kitchen cabinet color visualizer. Select the relevant surfaces there and pair the cabinetry with the intended countertop. Export the options you want to present as a client material proposal PDF. The selection on this page is a working preview; opening the full studio is a separate step. Keep the original photograph handy so the proposal can show the kitchen from the viewpoint the client remembers.

For a revision, start with the earlier PDF and ask which part the client wants to reconsider. If they liked the counter but felt the cabinets were too dark, keep the counter choice in place while exploring the door finish. Use the same photograph for the revised proposal. When discussing the documents, refer to the material pairing as well as the picture. That gives the client a way to identify their preferred version when the difference between two cabinet finishes looks subtle on screen.

What to settle with a physical sample

The photograph gives you context for a decision about the doors. It cannot tell you which branded paint code to order. Screen colors are approximate. Bring the cabinet sample alongside the actual worktop and consider the two materials together before confirming a finish. If a preview and a physical sample leave different impressions, make the final selection from the physical sample. Keep the preview as a record of where you wanted that finish to appear in the kitchen.

Your chosen photograph stays on your device while you outline and compare the doors here. Choosing a file opens it for local editing. Sending a photo for online rendering is a separate choice, and online rendering capacity is limited. You can use the original view and the local finish comparison to decide which selection you would actually want to render. A rendering still needs the same physical sample check before a client settles on materials.

Cabinet finish questions

Which kitchen picture should I open?

Choose your own kitchen photo or open the sample. A photo you choose stays on your device until you decide to send it for rendering.

How many finish options appear on an uploaded photo?

Your photo shows one palette at a time. Switch finishes on the same selection. The side-by-side view of three palettes uses the demo kitchen on the homepage.

Where do I try a different worktop with the doors?

Use the main finish studio to select cabinet faces and the countertop separately and compare the pairing. This tool keeps the focus on cabinet doors.

Can I identify a brand’s paint shade from the preview?

The tool does not identify a precise branded shade. Screen colors are approximate; confirm the finish with physical samples.

What can I hand to a client after choosing the doors?

Use the main studio to export a client material proposal PDF with the cabinet and countertop selections.

Is there a limit on online rendering?

Online rendering requires an active Studio subscription and available monthly render allowance. You can use the demo kitchen, compare finishes locally, and export an existing proposal as a PDF without signing in or using any allowance. If you use up your allowance, local tools still work and online rendering can resume when your allowance resets at the start of the next UTC calendar month.